Archive for the ‘Truck Cranes’ Category

There are forewarning instructions given when working on a SAF-Holland   lift gate.  In order to work safely with Holland lift gate, there are warnings that have to be carried out to avoid mishaps.  When liftgate is servicing, performing and undergoing standard operation, and you fail to comply with these warnings, this may result to severe injury or death.

It is really important to conform to warnings specified in equipment’s guidelines and safety measures.  You have to read, comprehend and follow the vital information contained in the manual so that you will be aware of what may happen when you fail to do so. Remember it may result some hazardous condition or can cause to develop a hazardous condition that may cause injury or fatality.

Holland Lift gates

Before operating the liftgate, make certain that the area is clear of obstacles and no other personnel is around. It is also important that the operator is fully trained and know the capabilities and the limitations of the liftgate.  The maximum rated capacity of the liftgate should not exceed.

You should always stand to one side of the platform when operating the liftgate from ground level.  Make sure parts of your body like fingers, arms, hands, legs and feet are clear of moving liftgate.  For no reason, you should not dismount from moving equipment.  If there are slippery surfaces you may carefully dismount from lift gate platform.  Never jump off the liftgate.

In case of emergency, you have to release the control switch to stop liftgate from operating. Make sure that the liftgate is in a stowed position when not in use. If the lift gate needs maintenance, then a qualified person should perform the task using only proper tools.

Manual Spitzlift cranes are easy and affordable. Crank it up and lift it in and your gone to your next destination.
Great for lighter loads and special deliveries.  Low budget? Manual Spitzlift crane is for you!

More and more people are acquiring car and trucks for their personal or business needs. Owning this stuff requires repairs and maintenance and it is quite expensive when it is done in any car shop. Nowadays, many choose to do some repairs at home specially when they have the knowledge of maintaining their own cars.

Those who own vehicles and wanted to set up a well equipped shop, they will need numerous kind of specialized tools and gadgets. The never ending lists of tools required can vary from basic hand and air to a more complicated equipment needed for the job to be performed. Repairs of vehicle will require lying under the vehicle so you will need jack, creeper and an axle stand.

Having a car lift at your garage needs a suitable space and it will depend on the model you choose. A tough concrete floor is a must if you choose a larger model. The building should be big enough to house the lift. You need to consider the height of the vehicle when it is raised to allow overhead doors, heating components and light fixtures that may get in the way.

There is a small type of this lift that is called one post lift. They are usually used for motorcycles, golf carts, garden tractors and ATVs. There are also the 2 post lift that can be accommodated in smaller space and the 4 post lift can handle larger load. Consider the thickness of the floor that will support the weight of the lift and the vehicle. You can find larger car lifts in truck repair shops.

Car lifts can are safer to use and can minimize the time required for most repairs.

Trucks need skilled and experienced truck drivers. It is hard to drive trucks specially when loaded with heavy equipments and other cargoes. He should know the necessary safety measures when driving trucks. It is important for the driver to know how much load his truck carries so that he will be adapted with the trucks movements.

For those who want to be a truck driver it is necessary to secure driver’s license in the State they live and a clean driving record. Their regular driver’s license is good enough to drive light trucks and vans. But drivers for tractor-trailers and bigger straight trucks must acquire a commercial driver’s license (CDL) same with the drivers carrying at lease 26,000 pounds of loads. CDL should also be obtained by all truck drivers operating trucks that transport dangerous and harmful materials not considering the size of the truck.

To get hold of a commercial driver’s license, one should pass a written examination on rules and regulations. They should also show that they can manoeuvre a commercial truck with ease and safety. Commercial drivers may not be issued a license if found out he has record of violations and for those who have license that had been revoked and suspended in other State.

Truck drivers are required to be in good health, at least 21 years old. He should not be convicted of any criminal act relating the use of motor vehicle; hit-and-run driving that resulted to death or injury, driving under the influence of alcohol or drugs. Truck drivers that will those qualifications can be an asset to any company.